Below is the extensive range of crumb rubber machinery that we offer.
CREPER
used in the intermediate stage of processing for intermediate and final shearing of rubber.
DRY PREBREAKER
usually used for Constant Viscosity Rubber processing and to remove white spots from un-dried rubber.
GRANULATOR
breaks and tears rubber within its chamber before discharging it through a suitable diameter holes screen.
HAMMERMILL
breaks and tears rubber within its chamber before discharging it through a suitable diameter holes screen.
MOBILE COAGULUM CRUSHER
crushes and dewaters thick coagulum for latex processing.
PELLETISER (COARSE, INTERMEDIATE, FINE)
used in the intermediate and final processing stage to reduce the size of small rubber pieces through the use of suitable die-plates to achieve uniform sizes. Serum and contaminants are also removed from the rubber during this process.
ROTARY CUTTER
used as a third stage size reduction machine for comminuting rubber to small sizes of less than 30mm. Also used to remove contaminants.
SHREDDER
a high-speed cutting machine to reduce the size of creped rubber blankets into fine crumbs. It is used for intermediate and final size reduction.
SLABCUTTER
a first stage size-reduction machine to reduce the size of very large and dirty cup lumps/slabs into smaller sizes.
TROLLEY DRYER
evenly dries and stabilizes properties of rubber after processing.
TWIN CHAMBER PRESS
hydraulically and automatically compresses rubber into bales of approximately 350 mm x 690 mm x 200 mm.
TWIN SCREW PREBREAKER
a second stage size reduction machine that reduces the size of rubber lumps into smaller pieces in a single pass. Also removes some serum from the rubber.
Below is the extensive range of crumb rubber ancillaries that we offer.
AIR SCRUBBER
removes offending odours from the exhaust air of dryer.
ACID TANK
stores formic acid and other liquid chemicals.
BELT CONVEYOR
transfers rubber between processing facilities.
BUCKET ELEVATOR
transfers rubber from wash blend tank to subsequent processing facility.
BULKING STIRRER
mixes and blends latex in the bulking tank.
COOLING CHAMBER
is used to cool down the rubber after the rubber is processed through the Dry Mode Prebreaker.
CYCLONE HOPPER
dewaters final size reduced rubber before it is placed into dryer trolleys.
FILLING STATION
consists of a vibrating screen and mobile hopper, used to dewater rubber before it is placed into dryer trolleys.
GRANULES TRANSFER PUMP
is used to transfer final size-reduced rubber to the filling station.
JETTING PUMP
jets, washes and blends rubber in the wash blend tank.
LUMP PUSHER BRIDGE
pushes rubber to opposite end of soaking tank.
MAINTENANCE GRINDER
is used for surfacing, grinding and sharpening knives and die plates.
MECHANICAL PADDLE
circulates rubber in wash blend tank and pushes rubber to Bucket Elevators / Screw Conveyors.
METAL DETECTOR
detects metal contaminants.
PNEUMATIC TRANSFER BLOWER
is used to transfer rubber without using water as a medium of transfer from the wet process to the dryer.
ROLLER BAGGING CONVEYOR
holds plastic bags for packing rubber bales.
ROTARY DRUM
removes contaminants at the early stages of processing.
SCREW CONVEYOR
transfers rubber from wash blend tank to subsequent processing facility.
STIRRER
moves, agitates, washes and blends rubber in wash blend tank.
SUBMARINE SCREW CONVEYOR
removes floating dirt.
MOTOR CONTROL CENTRE
for electrical controls of processing facility equipment and ancillaries.